Solvent-free Polychloroprene dispersion, particularly designed for bonding materials occurring in the shoe industry, Pedorthics, Prosthetics, bags, foam, and related materials.
The Renia advantages:
- All products are free of Toluene and MEK.
- All Aquilim adhesives are 100% free of VOCs, as well as completely odorless and non-toxic.
- Clear glue line, for a clean and professional appearance.
- Long shelf-life, no phase separation, no clumps, no stirring, shaking or thinning necessary.
- High efficiency: More coverage than traditional contact cements
Many materials can be bonded with each other like PUR-foam (PPT, Poron), leather, rubber, certain PE and
PP types, EVA, cork, felt, Styrene, ABS, wood , etc. A special pre-coating is not necessary.
Drying in an oven, with a heat gun, or IR is possible. Working with heat is not necessary, but allows working faster.
The adhesive film is very flexible and transparent. Water-resistance can be increased greatly by mixing adhesive
with 3-5% of Hardener =A300=
First grind or sand all the materials. Clean foam from separators (tests are necessary). Aquilim can be
sprayed, applied with a roll, brush, doctor blade, etc. If a porous material is combined with compact material,
apply only on the compact side and fix the parts within a few minutes. This greatly increases the drying time,
since the water needs to evaporate through the top layer.
4-6 hours when mixed with Hardener =A300=.
Depending to the combination of the materials and the method of application, the drying-time is 30-60 min.
The adhesive film can be reactivated with an IR lamp, with a quartz heater, a high-capacity IR-UV lamp or a
heat gun. The adhesive turns clear as soon as it is completely dry.
Shoes: 15-60 psi for at least 30 seconds. Plates: 15 psi per 100 cm2
Aquilim has a strong tendency to crystallize. The bonded parts can already be handled, sanded, and trimmed
after about an hour. The bonding strength increases continuously and reaches its maximum after 2 days.
At least 12 months at 68 °F ATTENTION: SENSITIVE TO FROST AND CHILL!
Can be diluted with small amounts of water
Rinse and clean containers and tools with water. This water can be added to the adhesive in small
quantities. Add acid to larger amounts and separate the precipitated solid contents