Custom Clicker Dies

If you require a custom die be made you will need to send the following information by email or Canada Post.

  1. Drawing, scan or sketch of part
    • All Holes shown with diameter
    • Location of slots
    • Dimensions of the die
  2. Clicker Press Capacity
  3. Die height required, either 3/4" or 1 1/4"

CAD files may be used, send those drawings with a .dwg or .dxf format

Drawings will be generated of the sketch you send and sent too you for approval.

Large Cardboard or paper templates can be sent, please use copies not the originals in case they are lost in the mail.

john noon

365 fourth Ave. PO Box 32

Rivers, Manitoba

R0K 1X0